Fluidization Characteristics of Air Dense Medium Agitated Separation Fluidized Bed with Different Distributors

ABSTRACT

The distribution plate structure plays an important role in the stability of air dense medium fluidized beds (ADMFB). Optimization of the distribution plate structure can reduce the generation of large bubbles. In the present work, the influence of the distribution plate structure on the fluidization characteristics of fluidized bed with agitator was investigated. Two different feedstock samples with the size fraction of 25–13 and 13–6 mm were tested individually. The experimental results showed that the fluidized bed density fluctuation was relatively small and the dead zone of gas-solids fluidized bed was significantly reduced by adding the stirring device into the fluidized bed under the optimal working conditions. Through a study of the sorting test, it was revealed that the separation performance can be effectively improved. This indicates that there is an obvious interrelationship between the structure of distribution plate and other process parameters, which affects the fluidization characteristics of ADMFB.     

Influence of photovoltaic generation model and time resolution on the reliability evaluation of distribution systems

This paper aims to investigate the influence of photovoltaic (PV) generation on reliability evaluation of distribution systems. Two PV generation models are used to predict the output power injected into the grid, taking into account the main relevant environmental variables, the irradiance and ambient temperature. Issues that directly affect the output power, such as the spatial smoothing effect due to the plant size and the influence of the irradiance and temperature measurement interval are taken into consideration. Using measurement time series of irradiance and local temperature, the models are used to generate power series in 4‐minute and hourly resolutions. The generated power series are used in a reliability assessment model, with the objective of evaluating the impact of solar resource variability on the reliability indices of the system. Case studies on the IEEE RBTS‐Bus 2 and on the real distribution system of Fernando de Noronha in Brazil are presented and discussed, for power plants of different capacities, considering the effect of the PV generation models, the temporal resolution of the time series and the spatial smoothing of the power output fluctuations. The results show that the power time series in hourly resolution significantly underestimates the frequency of interruptions. For the real system, this index is underestimated at the system level (up to 43%) and at the load points (up to 72%). On the other hand, for the interruption duration index, the temporal aggregation results in a small underestimation (just 4%). The results also indicates that the smoothing effect is irrelevant for typical PV system sizes of distribution systems with discretization equal to or above 4 minutes.     

基于改进雷达图的配电系统电能质量评估方法

本文针对配电系统电能质量综合评估存在的评估指标权重分配过于主观或客观的问题,提出一种基于改进雷达图法的配电系统电能质量评估方法。该方法利用最小偏差组合权重法计算各评估指标的最优组合权重。并在传统雷达图的基础上对各指标轴间夹角值的确定和特征向量的选取两方面做了进一步的改进。首先采用扇形区域取代原始的三角形区域,并利用最小偏差组合权重法计算各指标轴间夹角值。其次选择新的特征向量构造评估函数对配电系统电能质量进行综合评估。最后通过对某钢铁厂棒材变电站10kV配电系统电能质量进行综合评估,验证了该方法的可行性和合理性。较传统雷达图而言,改进雷达图法解决了传统雷达图法中各指标间信息共用以及评估结果不唯一的问题,使评估结果更加准确合理。     

仿人机器人的机械结构设计与控制系统构建

文章研发了一款适用于机器人教育教学的多功能、多用途、普适性的19自由度的小型仿人机器人,主要完成了该机器人的机械结构设计与控制系统构建工作[1]。所设计的机器人机械结构可靠性高、工艺性好、结构紧凑、样式新颖；所构建的机器人控制系统鲁棒性高、稳定性好、控制准确、反应迅速,圆满地实现了预期的设计任务。通过对优缺点的综合对比,得出组合式构型方案在功能性、实用性和稳定性等方面具有明显优势,有望通过后续软件系统的开发提高其运动效能,真正在青少年机器人教育中发挥重要作用[2]。     

基于改进正弦余弦算法的无线传感器节点部署优化

为了提高无线传感器网络（WSN）的性能，提出了一种基于改进正弦余弦算法（ESCA）的节点部署优化方法。首先，引入双曲正弦调节因子和动态余弦波权重系数，以平衡算法的全局探索与局部开发能力；然后，提出了一种基于拉普拉斯和高斯分布的变异策略，避免算法陷入局部最优。对于基准函数的优化实验结果表明，ESCA相比引力搜索算法、鲸鱼优化算法、基本正弦余弦算法（SCA）及其改进算法具有更高的收敛精度和收敛速度。最后，将ESCA应用于WSN节点部署优化，结果表明其优化覆盖率相比改进粒子群优化算法、外推人工蜂群算法、改进灰狼优化算法和自适应混沌量子粒子群算法分别提高了1.55个百分点、7.72个百分点、2.99个百分点和7.63个百分点，用更少节点便可达到相同目标精度。     

超级计算机网络引导技术研究与分析

针对超级计算机系统中网络引导时间开销大的问题，提出网络引导分布算法是影响网络引导性能的主要因素之一，是优化网络引导性能的主要方向的观点。首先，分析了影响大规模网络引导性能的主要因素；其次，结合一种典型超级计算机系统，分析了超节点循环分布算法（SCDA）和插件循环分布算法（BCDA）的网络引导数据流拓扑结构；最后，量化分析了这两种算法对各个网络路径段的压力和可获得的网络性能，发现BCDA性能是SCDA性能的1~20倍。通过理论分析和模型推导发现，在计算节点和引导服务器之间使用更细粒度的映射算法可以在引导部分资源时使用尽量多的引导服务器，减少对局部网络资源的过早竞争，提升网络引导性能。     

黄浦江下游吴淞口站低潮位重现期研究

黄浦江为感潮河流,低潮位重现期的确定对黄浦江航道的设计具有重要意义。为了准确估计黄浦江低潮位的重现期,以黄浦江下游吴淞口站年最低潮位序列为例,在对样本进行三性审查的基础上,分别采用传统的数理统计方法和时变矩方法进行水文频率分析。结果表明:吴淞口站年最低潮位序列在1996年发生了变异;还现修正后的序列服从位置参数线性时变的GEV模型,低潮位存在缓慢的上升趋势;一致性条件下百年一遇低潮位约为0.261 m,在非一致性条件下其重现期增大为150 a。非一致性条件下的重现期增大说明黄浦江现有的航道设计标准偏安全,航道通航保证率提高。     

Validation of a 3D multiphase-multicomponent CFD model for accidental liquid and gaseous hydrogen releases

As hydrogen-air mixtures are flammable in a wide range of concentrations and the minimum ignition energy is low compared to hydrocarbon fuels, the safe handling of hydrogen is of utmost importance. Additional hazards may arise with the accidental spill of liquid hydrogen. Such a release of LH2 leads to a formation of a cryogenic pool, a dynamic vaporization process, and consequently a dispersion of gaseous hydrogen into the environment. Several LH2 release experiments as well as modeling approaches address this phenomenology. In contrast to existing approaches a new CFD model capable of simulating liquid and gaseous distribution was developed at Forschungszentrum Jülich. It is validated against existing experiments and yields no substantial lacks in the physical model and reveals a qualitatively consistent prediction. Nevertheless, the deviation between experiment and simulation raises questions on the completeness of the database, in particular with regard to the boundary conditions and available measurements.     

考虑节点过载的碳排放空间关联系统级联失效模型

为提高突发事件级联失效对现实碳排放关联系统破坏程度的评估可信性，在传统复杂网络的"负载-容量"级联失效模型基础上，考虑个体成员对负载的冗余能力，提出一种过载失效概率，构建了考虑节点过载状态的级联失效模型，并基于节点特性提出了6种过载节点负载分配策略。仿真结果表明：在过载节点负载分配策略中，综合分配策略整体上较优，能够有效控制级联失效的规模，增加网络鲁棒性；在一定范围内提升过载参数有助于降低级联失效的影响，但提升到一定程度时改善效果不明显；在不同负载分配策略下，剩余系数存在一个最优值，容量可调参数存在最优区间，可以使碳排放关联网络保持较好鲁棒性的同时，花费较小的构建成本，其中紧密度分配策略对应的网络构建成本较高。     

阳泉矿区煤样不同应力状态下声发射特性分析

为探索原煤煤样的力学性能和不同应力状态下的声发射活动特性,对阳泉矿区新景矿、平舒矿主采煤层的煤样进行了单轴、三轴压缩和巴西劈裂的声发射试验,分析了2种煤样力学性能及不同加载过程的声发射活动规律。证明通过监测声发射(微震)活动分析煤样或煤岩体内部破坏状态是一种方便有效的手段。